|
|
|
|
Product and Shipping Info
Product Specifications
| Light | Battery
Type | Burn
Time
Low
(hrs.) | Burn
Time
High
Weight
(lbs.) | Bulb
Type | Warranty |
|
| Bronze Pro 6 Box Light | Gell Cell | 6.5 | 1.5 | 2.5 | 10564 | 1 year unlimited warranty |
| Bronze Pro 8 Mini Box Light | NiMh | 7.5 | 1.5 | 0.5 | 10564/7V30 | 5 Years (2 Years on Complete Unit,
3 Years Labor Only)
|
| Gold Pro 21 Box Light | NiMh | 10-12 | 2 | 2.5 | 12V32, 12V32X | 5 Years (2 Years on Complete Unit,
3 Years Labor Only) |
| Platinum Pro 26 Box Light | NiMh | 12-14 | 3 | 3 | 24V98, 24V98X | 5 Years (2 Years on Complete Unit,
3 Years Labor Only) |
| Silver Pro 14 Belt Light | NiMh | 8-10 | 2 | 1.5 | CB10X | 5 Years (2 Years on Complete Unit,
3 Years Labor Only) |
| Silver Pro Budget 14 Belt Light | NiMh | 8-10 | 2 | 1.5 | CB10X | 1 year unlimited warranty |
| Gold Pro 17 Belt Light | NiMh | 10.12 | 2 | 2 | 12V32, 12V32X,
CB10X | 5 Years (2 Years on Complete Unit,
3 Years Labor Only) |
| Gold Pro 21 Budget Belt Light | NiMh | 10.12 | 2 | 2.5 | 12V32, 12V32X | 1 year unlimited warranty
|
| Gold Pro 21 Belt Light | NiMh | 10-12 | 2 | 2.5 | 12V32, 12V32X | 5 Years (2 Years on Complete Unit,
3 Years Labor Only) |
| Gold Pro 21/21 8 amp Belt Light | NiMh | 20-22 | 4 | 4.5 | 12V32, 12V32X | 5 Years (2 Years on Complete Unit,
3 Years Labor Only) |
| Platinum Pro 26 Belt Light | NiMh | 12-15 | 3 | 3 | 24V98, 24V98X | 5 Years(2 Years on Complete Unit,
3 Years Labor Only) |
The Switch
Switches on our lights saves little electrical energy at lower settings. The current drain on a battery is basically determined by the amount of amperage that a particular bulb draws during use. This is the reason for dual filament "High-Low" type bulb and the 5100 style head on all of our lights. This type bulb draws much less current from the battery when the low side is used than when the high side is used, no matter where the battery switch is set.
To prevent excessive battery drain, we install a thermistor shut-off on all of our lights. This shut-off automatically turns off your light when the bright or high side of the bulb is in use and the battery switch is set at any click other than the highest position. When this occurs, simply turn the battery switch back to the brightest setting, and then you can use the rotary switch on the headpiece to switch to the low side of the bulb. The shut-off does not affect the low side of the bulb, so it can be used at any desired brightness setting by using the battery switch. A quick look at the burn times on our lights as listed above should help you understand this feature. The automatic shut-off will prevent the possibility of you having to walk out of the woods in the dark.
Charging
Smart Charger
If you burn your light for 10 minutes or 10 hours all you have to do is plug your smart charger into your light. The worry is over; you will not over charge your battery. It charges your battery to a full charge then switches to a trickle charge. Your light can be left on charge without damaging your battery but it is still recommended that you unplug it within in 24 hours. The amber L.E.D. shows that the charger is working; the green L.E.D. shows that your light is ready. *WARNING* DO NOT RUN YOUR BATTERY ALL THE WAY DOWN. PUT YOUR BATTERY ON CHARGE AFTER EACH USE.
Standard Wall Charger
When in use, the charger should feel warm to the touch while charging. Charging your battery for 10 – 18 hours should bring your battery pack to full charge, depending on time used since last charge. WHEN USING THIS CHARGER, DO NOT LEAVE YOUR LIGHT PLUGGED IN FOR LONGER THAN 24 HOURS! If your light is not in use, charge it once a month. Avoid running battery completely down!
Shipping Rates
UPS Ground $15
UPS 2nd Day Air $40
UPS Next Day Air $75
Please include a physical mailing address during check out. (NO P 0 BOXES)
  
Home
| Box Lights
| Belt Lights
| Accessories
| Product & Shipping Info
| Contact Us
|
